SEARCH PRODUCTS BY:    Brand    Color    Surfaces    Finish    Certified    Auto Paint Lookup

MSDS    Surface Preparation Guide    Project Tutorials    Color Guide    FAQ    Coverage Chart    Glossary    Videos

Specification Library    Educational Courses    Warranties    Case Studies    Newsletters

English CANADIAN CONSUMERS  |  INDUSTRIAL PRODUCTS  |  INTERNATIONAL  |

SEARCH MSDS/TDS ABOUT US LOCATE A RETAILER CONTACT US

DO IT YOURSELF RESOURCES > PROJECT TUTORIALS > ENTRY TABLE MSDS Surface Preparation Guide Project Tutorials Color Guide FAQ Coverage Chart Glossary Videos Entry Table DIRECTIONS Finish-sand following recommendations in Wood 101 Shake the Danish Oil container thoroughly. (Really shake it up and please make sure that the cap is securely in place before you shake.) Apply Danish Oil to a small area to test the color. If you’re happy with the look, move onto the next step. For this project, we used WATCO Danish Oil in Natural. Flood the surface using a brush or cloth, applying additional finish to areas that absorb all of the liquid. Allow the Danish Oil to penetrate for 30 minutes. Print Version ESTIMATED PROJECT TIME 2 Hours TOOLS & SUPPLIES Brush or cloth Sandpaper (150-grit and 220-grit) Mineral spirits or paint thinner WATCO Danish Oil in Natural

Locate a Retailer  |  Site Map  |  About Us  |  Careers  |  Contact Us  |  International  |  Privacy Statement Testors  |  Modern Masters  |  PaintIdeas  |  WoodAnswers  |  Okon  |  California Supply Chain Disclosure