| Wood Floor Transformations |
| | | | | | | | | | • Attach the scrub pad to wood applicator block and attach the applicator block to the threaded broom handle.
• Pour contents of No Sanding Refinishing Prep into the paint tray.
• Apply the No Sanding Refinishing Prep on one four-foot to eight-foot square area at a time with the scrub pad attached to the applicator head.
• In a clean bucket, mix ½ -1 ounce liquid soap with each gallon of water
• Apply soap and water solution over one four-foot section at a time, rinsing the entire area.
• Wipe surface dry with clean paper towels or lint free rags.
• Allow floor to dry to touch before applying Clear Floor Finish
• Stir Clear Floor Finish slowly. Be careful not to introduce any bubbles into the mixture.
• Replace the scrub pad with the synthetic applicator
• Work in four foot sections, keeping a wet edge
• Allow first coat to dry to touch
• Apply second coat to dry a minimum 8 hours before light use, and 24 -72 hours for curing before returning to normal use.
| |
|
|  | | Print Version |
| | | | | | | | | |  | Threaded Broom Handle | | | | Paint Tray | | | | Clean Lint-Free Rags | | | | Painter’s Tape | | | | Bucket | | | | Liquid Soap | | | | Sponge Mop | | |
|
| |
|
